The steps in configuring Gigaspace using multiple network cards include viewing the information of the network interface first. The next step is to determine the NIC that will connect the lookup service. The use of a specific network interface must be limited. To be able to limit the use of a particular NIC, the files in the service configuration must be changed. The network administrator may also use unicast protocol since the cluster member URLs are configured using multicast protocol by default. When using unicast protocol, be sure to specify the machine NIC that is accessible for discovery. After doing the steps in configuring Gigaspace, the administrator must test the configuration of the system and troubleshoot the configuration if there are problems encountered.