ISO/IEC TR 24028:2020 vs Annex 11 to EU GMP - Computerised Systems
What is the difference between ISO/IEC TR 24028:2020 and Annex 11 to EU GMP - Computerised Systems?
ISO/IEC TR 24028:2020 is a other framework applying in International, with 54 controls across 4 domains. Annex 11 to EU GMP - Computerised Systems is a other framework applying in the European Union (EMA/EC), with 17 controls across 6 domains. Both govern the same subject, so their requirements overlap; the mapping below shows which controls carry across and which are asked for by only one of them.
ISO/IEC TR 24028:202054 controls
Annex 11 to EU GMP - Computerised Systems17 controls
Questions people ask about ISO/IEC TR 24028:2020 and Annex 11 to EU GMP - Computerised Systems
What is the difference between ISO/IEC TR 24028:2020 and Annex 11 to EU GMP - Computerised Systems?
ISO/IEC TR 24028:2020 has 54 controls while Annex 11 to EU GMP - Computerised Systems has 17 controls. Both frameworks address compliance requirements but differ in scope, focus, and applicability. Use our platform to explore the exact control-to-control mappings.
Do I need both ISO/IEC TR 24028:2020 and Annex 11 to EU GMP - Computerised Systems?
Whether you need both depends on your industry, regulatory requirements, and customer expectations. Many organizations implement multiple frameworks simultaneously. Our compliance platform helps you map controls between ISO/IEC TR 24028:2020 and Annex 11 to EU GMP - Computerised Systems so you can identify shared requirements and avoid duplicate effort.
How do ISO/IEC TR 24028:2020 and Annex 11 to EU GMP - Computerised Systems controls map to each other?
Our platform maps controls between ISO/IEC TR 24028:2020 and Annex 11 to EU GMP - Computerised Systems at a granular level. Each mapping shows whether controls are fully aligned, partially aligned, or represent gaps. This helps you prioritize implementation when pursuing both frameworks.
Which framework should I implement first, ISO/IEC TR 24028:2020 or Annex 11 to EU GMP - Computerised Systems?
The best starting point depends on your specific regulatory requirements, industry, and customer demands. Consider which framework is most urgently required by your stakeholders or regulators. Use our free compliance platform to run a gap analysis and determine the optimal implementation sequence.
Each framework on its own
Comparisons people read next
Each of these compares one of the two standards above against another it shares controls with.
ISO/IEC TR 24028:2020 vs ISO/IEC 38500:202422 shared controlsISO/IEC TR 24028:2020 vs ISO 19011:20182 shared controlsISO/IEC TR 24028:2020 vs ISO 31000:20182 shared controlsAnnex 11 to EU GMP - Computerised Systems vs FDA 21 CFR Part 1113 shared controlsAnnex 11 to EU GMP - Computerised Systems vs NIST SP 800-53 Rev 59 shared controlsAnnex 11 to EU GMP - Computerised Systems vs South Korea ISMS-P8 shared controls
See all control mappings with interactive gap analysis
Explore the complete mapping between ISO/IEC TR 24028:2020 and Annex 11 to EU GMP - Computerised Systems on our compliance platform.
Written and maintained by Gerard Blokdyk, The Art of Service.