Skip to content

Alarm System

What is Alarm System?

A security system designed to detect and alert on unauthorized entry, environmental hazards, or other security-relevant events at physical locations.

Information Security

Each of these is named in at least one of the same controls as alarm system. The number is how many controls name both.

What the standards actually require on alarm system

Requirements naming alarm system across 6 standards, quoted from the control text.

Whenever hazardous waste is poured, mixed, spread or otherwise handled, all personnel involved must have immediate access to an internal alarm or emergency communication device, directly or through visual or voice contact with another employee;

epa-rcra-hazardous-waste-management::264.34 · § 264.34 Access to communications or alarm system →

Applies to all emergency employee alarms installed to meet a particular OSHA standard, but not to discharge or supervisory alarms on fixed extinguishing systems or supervisory alarms on suppression, alarm or detection systems unless they are intended as employ...

osha-29-cfr-1910::1910.165 · 1910.165 Employee alarm systems →

Where a service visit, inspection or test shows a system falling short of the applicable codes and adopted standards, or not being tested or maintained to them, a completed yellow label is fixed to the outside of the panel cover or in a permanent location to s...

texas-state-fire-marshal-rules-28-tac-chapter-34-subchapters-c-e-f-and-g::34.623 · Yellow labels for non-compliant fire alarm systems, with written notice to owner and AHJ within five business days and notice when corrected →

Section 6 covers fire detection and alarm systems, including smoke and heat alarms connected to them (Clause 6.4.2), emergency warning systems (6.4.3) and emergency intercom systems (6.4.4);

as-1851-2012-routine-service-of-fire-protection-systems-and-equipment::6.2-6.3 · 6.1 to 6.3 Fire detection and alarm systems: scope, precautions and frequency →

Where applicable, whether an alarm system is needed to control risk, and the risks its operation or failure brings, are addressed in the risk management process, and any alarm system implemented complies with IEC 60601-1-8, checked as that collateral standard...

iec-60601-1-medical-electrical-equipment-safety::12.3 · 12.3 Alarm systems →

Physical intrusion detection is installed and wired into the alarm system. The assessor interviews personnel and observes the intrusion-detection controls.

pci-3ds-core-security-standard::P2-7.1.6 · P2-7.1.6 Intrusion detection linked to the alarm system →

Questions people ask about alarm system

What is Alarm System?
A security system designed to detect and alert on unauthorized entry, environmental hazards, or other security-relevant events at physical locations.
Why is Alarm System important for compliance?
Alarm System is a key concept in Information Security. Understanding alarm system helps organizations meet regulatory requirements, reduce risk, and demonstrate due diligence during audits. Our compliance platform maps 1,016 frameworks with 316K cross-framework control mappings.
Which compliance frameworks address Alarm System?
Alarm System appears in the requirement text of EPA RCRA Hazardous Waste Management, OSHA General Industry Standards (29 CFR Part 1910), Texas State Fire Marshal Rules (28 TAC Chapter 34, Subchapters C, E, F and G), AS 1851:2012 Routine Service of Fire Protection Systems and Equipment, IEC 60601-1 - Medical Electrical Equipment Safety. Across these standards we have identified 22 controls that name it directly, each linked to the control text on the compliance platform.
Where can I learn more about Alarm System?
Explore our compliance framework pages to see how alarm system applies across different standards and regulations. Our implementation guides provide step-by-step guidance, and the compliance platform offers AI-powered analysis of how this concept maps across 1,016 frameworks.

See how Alarm System applies across compliance frameworks

Our platform maps 1,016 frameworks with 316K cross-framework control mappings. Explore how this concept is addressed across standards.

Written and maintained by Gerard Blokdyk, The Art of Service.